Flat and low-slope roofs are common on commercial buildings, additions, and some residential structures in Asheboro. They require different repair approaches than pitched shingle roofs.

Asheboro is home to the North Carolina Zoo, one of the largest walk-through natural-habitat zoos in the world and by far the county's biggest tourism draw, an unusual anchor institution for what remains at its core a smaller Randolph County seat with deep roots in furniture and textile manufacturing. That manufacturing history shaped roofing stock heavy on early-to-mid-20th-century homes near the historic downtown, sitting alongside newer residential development that's grown as the zoo and surrounding tourism economy have added jobs and visitors to the area. Asheboro sits at the western edge of the Piedmont Triad, close enough to the Uwharrie Mountains' rolling terrain to see slightly more locally variable storm patterns than flatter Piedmont cities further east. The older manufacturing-era roofing stock tends to need more frequent service than Asheboro's newer construction, a fairly typical pattern for a smaller Piedmont county seat with a genuine industrial-era core.

Flat Roof Systems Covered

TPO, EPDM (rubber membrane), modified bitumen, and older built-up gravel systems all show up regularly across North Carolina on commercial buildings, porch roofs, and additions, and each fails in its own way. TPO's heat-welded seams can separate under inconsistent weld temperatures or years of foot traffic. EPDM relies on adhesive or seam tape at every joint, which is the single most common failure point on a rubber roof, more than the field membrane itself. Modified bitumen, whether torch-applied or self-adhered, is prone to blistering when moisture gets trapped underneath during installation or later intrusion, and to shrinkage cracking as it ages in the sun. Older built-up gravel systems hide problems under their surfacing and typically need probing at seams and flashings to locate an active leak rather than a visual check alone. Across the state's climate, from Piedmont summer heat to coastal humidity and hurricane exposure, heavy rain events add a real moisture-load stress on top of whatever mechanical wear a given system already carries.

  • TPO — heat-welded seams that can separate under inconsistent installation or years of foot traffic
  • EPDM (rubber) membrane — adhesive or tape seams are the most common failure point, not the field membrane
  • Modified bitumen — prone to blistering from trapped moisture and shrinkage cracking with age
  • Built-up (gravel) roofing — hides problems under surfacing, usually needs probing to locate an active leak

Drainage and Ponding Water

Flat roofs often develop ponding water problems that accelerate membrane degradation and, over repeated events, can add real structural load, and North Carolina's tropical rain season and Piedmont thunderstorm activity both make that ponding risk a genuine, recurring concern rather than a rare one. Drainage is assessed as part of every flat roof inspection, since a membrane repair alone rarely holds if the underlying cause is a clogged drain, a low spot from settling, or scuppers blocked with storm debris. Because flat roofs don't shed water the way a pitched shingle roof does, a small puncture or an open seam can go unnoticed for weeks, slowly saturating the insulation board beneath the membrane before it ever shows up as an interior stain, which is why every penetration and every low spot gets checked, not just the section that's obviously wet.

  • Check drains, scuppers, and gutters for debris after every significant storm
  • Watch for ponding water that doesn't clear within 24-48 hours of dry weather
  • Inspect every penetration and seam, not just areas showing an obvious problem
  • Address small punctures and seam separations before they saturate the insulation underneath

Have Questions?

Serving Asheboro and Randolph County — free estimates, no pressure.

Call (472) 213-9471

This content is reviewed by the North Carolina Roof Repairs editorial team and informed by licensed-contractor sourcing, manufacturer documentation, and established industry standards for roof repair. Read our editorial standards.